DB25 High-frequency Tube Welding line DB25 High-frequency Tube Welding line

DB25 High-frequency Tube Welding line

Product Description
Description


This DB25 Welding tube machine line is specially used for producing carbon high frequency welded pipe mill. 


This welded machine line is specially used for producingΦ8-Φ23mm, δ0.2-1.3mm high-frequency straight seam welded pipe and corresponding square pipe and special-shaped pipe(δ≤1mm).


It made by refined materials in high precision and equipped with fixed length cutting saw. The main machine includes forming, welding, sizing and straightening device. 


The composition of equipment is from decoiler to fixed length-cutting saw. 


Rolling speed can be adjusted correspondingly within suitable range of pipe diameter and wall thickness.

Working Flow

UncoilerShear&end welderHorizontal

 accumulatorLevelingFormingHF

 weldingScraperCoolingSizingStraighteningFlying saw cut offRun out table




Technical Parameters

Item

Patameter

Machine Components

Hot/cold rolled carbon steel or Galvanized steel coil

Width of strip steel

25-100mm

Diameter

8-25mm

Square pipe

10*10-25*25

Thickness of strip steel

0.2-1.3mm

Cutting Type

Hot friction saw

Cutting tolerance

±1mm

Tracking motor

11Kw

Pneumatic system

0.4-0.7Mpa


Machine Components


1. Uncoiler:                                                                      1 set

2. Shearing and butt-welder:                                           1 set

3. Accumulator:                                                               1 set

4. Forming Welding &sizing unit:                                    1 set

5. Computer-controlled tracking cutting saw:                 1 set

6. Run-out table:                                                            1 set

7. Solid-state high-frequency welder:                            1 set

User configuration items (for reference):

Unit power standard

380V / 22V; 50HZ; three-phase four-wire system

Unit power

high frequency

100 KW

 

Main motor

40 KW

Unit area

30M×5M(L*W)

High-frequency room volume

4M×4M×2.8M

Water source

cooling pool 30m³ / 1 set high-pressure pump

Air source

1 set Air compressor

Required lifting equipment

Two 10-ton cranes

Conventional consumables

  1. High-frequency cable and unit connection
  2. Magnetic rod   3.Saw blade
Machine Pictures
Products
Top
Product Catalog